Sedativ Posted February 28, 2014 Report Share Posted February 28, 2014 Hello , this is the 1st time in my life I am minning , I set everything up like in the tutorials and I am using GUIMiner.In GUIMiner I have like: 21 accepted and 1 stale And on VirCurPool these doesn't count: http://gyazo.com/baaec4bf67463447b123ba7856b06235 Link to comment Share on other sites More sharing options...
necom Posted February 28, 2014 Report Share Posted February 28, 2014 It looks like your hashrate is registered as 0kh/s, so double-check your worker and make sure you're using proper credentials with the pool. Most pools have a "My workers" page where you can set up the worker and then you use the worker as a username. I'm not 100% sure, but I think you usually /must/ have at least one worker. Username format for GUIminer would be: "accountname.worker", but check the pool instructions to be sure. When your miner is running and shares are registering at the pool, you'll see your hashrate show up on the pool on that panel in your screenshot, but also on that My workers page. Link to comment Share on other sites More sharing options...
LongAndShort Posted February 28, 2014 Report Share Posted February 28, 2014 Im getting a lot of these kinds of issues form people, I'm assuming people are downloading a miner from the getting started page assuming it will just mine for them but you have to make sure you are putting in the right pool details and your worker details or else it will mine to some random pool for some random account Link to comment Share on other sites More sharing options...
Sedativ Posted February 28, 2014 Author Report Share Posted February 28, 2014 Everything is correct I checked right now ! I use GUIMiner Link to comment Share on other sites More sharing options...
LongAndShort Posted February 28, 2014 Report Share Posted February 28, 2014 Everything is correct I checked right now ! I use GUIMiner Try at pool.mincoin.io see if you ahve the same issue Link to comment Share on other sites More sharing options...
Sedativ Posted February 28, 2014 Author Report Share Posted February 28, 2014 Yes, that's why i switched from pool.mincoin.io and I have same issue :| Link to comment Share on other sites More sharing options...
LongAndShort Posted February 28, 2014 Report Share Posted February 28, 2014 are you hashing on a graphics card or a cpu? Link to comment Share on other sites More sharing options...
Sedativ Posted February 28, 2014 Author Report Share Posted February 28, 2014 On my Graphics Card http://gyazo.com/1ea69326dd7433e8d8de3ea59de3d904 http://gyazo.com/de460379e0c3867846177f451beaca71 2014-02-28 00:49:39: Listener for "Mineru": pool.mincoin.io:3333 28/02/2014 00:49:39, no response to getwork, using as stratum Link to comment Share on other sites More sharing options...
LongAndShort Posted February 28, 2014 Report Share Posted February 28, 2014 please try downloading and setting up sgminer http://www.reddit.com/r/litecoinmining/comments/1va8g2/ann_sgminer_400_release/ Link to comment Share on other sites More sharing options...
LongAndShort Posted February 28, 2014 Report Share Posted February 28, 2014 There you go i can see you hashing now i'm glad you got it to work would you mind sharing your solution so others can problem solve with this thread in the future? if so i suggest just editing your op and put that you got it working by following the steps you did. thanks and happy hashing Btw i know why guiminer wasn't working..you were using sha-256 algo to mine and not scrypt..Mincoin is a scrypt coin not a sha-256 coin Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now